Dreamwalls
- Exterior Paints

Dreamwalls Exterior Emulsion
Dreamwalls Exterior Emulsion - Dreamwalls Exterior Emulsion is an advanced Latex based exterior emulsion which protects the exterior walls from dampness by covering the cracks.It offers excellent resistance to chalking, cracking and weathering in comparison to Cement Paint. Dreamwalls Exterior Emulsion provides cleaner shades which doesn't fade and lasts longer. Dreamwalls Exterior Emulsion offers good anti-algal performance in dry to moderately humid climatic conditions. It also has very good glitter to add to the look of architectural designs of the exteriors of the buildings and homes.
Dreamwalls Exterior Emulsion with Old surface is as good as it is good with new surface.
To apply it on an Old surface: If the existing surface is lime / cement paint, scrap the the existing layers completely and claen the surafce with water to remove the loose ad dust particles. Apply one coat of primer with 1:1 dilution and allow it dry for 5-6 hours before applying Dreamwalls Exterior Emulsion. Dilute Dreamwalls Exterior Emulsion with 300 – 400 ml of water to 1 ltr. of paint. Give a gap of minimum of 3-4 hours betwween the coats.
To apply it on an New surface: Before applying any paint or primer on te exteriors, ensure that the wall is completely dry, without any dampness and free from effloresence. Apply one coat of exterior primer with 1:1 dilution or diluted Dreamwalls Exterior Emulsion with 1:1 and apply as self primer. Apply the top two coats of Dreamwalls Exterior Emulsion with dilution of 300 – 400 ml of water with a gap of 4 – 6 hours.
Suggestions: Avoid paint application on the surface where sunlight is directly falling particularly in summer. As the leakages of building starts from the cracked surface of the parapet, apply Dreamwalls Exterior Emulsion without any dilution on parapets to make the rain water slip from the parapet.
Coverage: It covers an area of 50 – 60 sft / ltr for two coats of application.
To apply it on an Old surface: If the existing surface is lime / cement paint, scrap the the existing layers completely and claen the surafce with water to remove the loose ad dust particles. Apply one coat of primer with 1:1 dilution and allow it dry for 5-6 hours before applying Dreamwalls Exterior Emulsion. Dilute Dreamwalls Exterior Emulsion with 300 – 400 ml of water to 1 ltr. of paint. Give a gap of minimum of 3-4 hours betwween the coats.
To apply it on an New surface: Before applying any paint or primer on te exteriors, ensure that the wall is completely dry, without any dampness and free from effloresence. Apply one coat of exterior primer with 1:1 dilution or diluted Dreamwalls Exterior Emulsion with 1:1 and apply as self primer. Apply the top two coats of Dreamwalls Exterior Emulsion with dilution of 300 – 400 ml of water with a gap of 4 – 6 hours.
Suggestions: Avoid paint application on the surface where sunlight is directly falling particularly in summer. As the leakages of building starts from the cracked surface of the parapet, apply Dreamwalls Exterior Emulsion without any dilution on parapets to make the rain water slip from the parapet.
Coverage: It covers an area of 50 – 60 sft / ltr for two coats of application.
- Cost
- Premium
- Finish
- Matt and Shine
- Availability
- 20ltrs,10ltrs,4ltrs,1ltrs.

Dreamwalls Premium Exterior Primer
Dreamwalls Premium Exterior Primer is a water based primer which is suitable for exterior surfaces. Dreamwalls Premium Exterior Primer is made of special pigments,which ensures longer life for the entire paint system. Dreamwalls Premium Exterior Primer seeps through the permeable surface and seals it completely. Moreover, this primer provides a better whiteness and opacity.
- Cost
- Premium
- Finish
- Shine and Smooth
- Availability
- 20ltrs,10ltrs,4ltrs,1ltrs.

Dremwalls Universal Primer
Dremwalls Universal Primer is suitable for undercoat for walls, asbestos, concrete, cement before finish coat. It gives a suitable substrate for wall finishing.Silver Plus Cement Paints is thinned with potable water to achieve applicable consistency. It provides a few special features to substrate as easy brushing, alkali resistant, excellent covering, quick drying and better sealing power. It is used as a primer for painting of Exterior wall finishes (water base) like Exterior Acrylic Emulsions and Exterior Plastic Emulsions etc.
- Cost
- Mid Range
- Finish
- White and Smooth
- Availability
- 20ltrs,10ltrs,4ltrs,1ltrs.

Silver Plus Cement Paints
Silver Plus Cement Paints is Decorative Water Proof Cement Coating. The Cement Paint is a premium Exterior/Interior wall finish designed to give protection and resistance to varying weather condition. It gives the best adhesion to any kind of wall surface. Moreover, it can be easily dispersed with water and resistance to fungal, algae infection.
Directions for Use:
Surface Preparation : The surface should be thoroughly cleaned and all the oily, previously painted surfaces should be removed with wire brush. Wet the wall at least 1-2 times with clean water and concrete walls should be wetted half an hour before application. If there is any cracks in the application surface then it should be treated with a cement sand slurry, of Dry Wall Putty.
Application : One volume of SonaTuff to one volume of water. To prepare the mixture, take one part of Silver Plus Cement Paints and add one third of water in it. Stir it in slow pace to make fine thick paste and balance of water is added to make it in applicable consistency. The mixture applied after first coat should be hard and water wetted before successive coat which is to be applied after 6-8 hrs. depending on weathering conditions
Directions for Use:
Surface Preparation : The surface should be thoroughly cleaned and all the oily, previously painted surfaces should be removed with wire brush. Wet the wall at least 1-2 times with clean water and concrete walls should be wetted half an hour before application. If there is any cracks in the application surface then it should be treated with a cement sand slurry, of Dry Wall Putty.
Application : One volume of SonaTuff to one volume of water. To prepare the mixture, take one part of Silver Plus Cement Paints and add one third of water in it. Stir it in slow pace to make fine thick paste and balance of water is added to make it in applicable consistency. The mixture applied after first coat should be hard and water wetted before successive coat which is to be applied after 6-8 hrs. depending on weathering conditions
- Cost
- Premium
- Finish
- Matt
- Availability
- 25kgs,5kgs,1kgs

Suraksha Plus Cement Paint
Suraksha Plus Cement Paint is a decorative, waterproof cement coating, which is a superior interior/ exterior wall finish, designed to give protection and resistance to varying weather conditions. It gives the best adhesion to the wall surface. It can be easily dispersed with water and resistance to fungal, algae infection.
Directions for Use:
Surface Preparation : The surface should be thoroughly cleaned and all the oily, previously painted surfaces should be removed with wire brush and wet the wall at least 1-2 times with clean water, and concrete walls should be wetted half an hour before application. If there is any cracks in the application surface then it should be treated with a cement sand slurry having sonacrete 5% by weight of cement.
Application : One volume of Cement Paint to one volume of water. To prepare the mixture, take one part of Cement Paint and add one third of water in it. Stir it in slow pace to make fine thick paste and balance of water is added to make it in applicable consistency. The mixture applied after first coat should be hard and water wetted before successive coat which is to be applied after 6-8 hrs. depending on weathering conditions.
Directions for Use:
Surface Preparation : The surface should be thoroughly cleaned and all the oily, previously painted surfaces should be removed with wire brush and wet the wall at least 1-2 times with clean water, and concrete walls should be wetted half an hour before application. If there is any cracks in the application surface then it should be treated with a cement sand slurry having sonacrete 5% by weight of cement.
Application : One volume of Cement Paint to one volume of water. To prepare the mixture, take one part of Cement Paint and add one third of water in it. Stir it in slow pace to make fine thick paste and balance of water is added to make it in applicable consistency. The mixture applied after first coat should be hard and water wetted before successive coat which is to be applied after 6-8 hrs. depending on weathering conditions.
- Cost
- Mid Range
- Finish
- Matt
- Availability
- 25kgs,5kgs,1kgs

Super Cem Cement Paint
Super Cem Cement Paint is a fine quality paint, used to give a makeover to the decor of any place. The Super Cem Cement Paint is specifically designed to give a proper protection and resistance to varying weather conditions like excessive heat,rain,humidity etc..
Directions for Use:
Surface Preparation : The surface should be thoroughly cleaned and all the oily, previously painted surfaces should be removed with wire brush and wet the wall at least 1-2 times with clean water, and concrete walls should be wetted half an hour before application. If there is any cracks in the application surface then it should be treated with a cement sand slurry having sonacrete 5% by weight of cement.
Application :One volume of Cement Paint to one volume of water. To prepare the mixture, take one part of Cement Paint and add one third of water in it. Stir it in slow pace to make fine thick paste and balance of water is added to make it in applicable consistency. The mixture applied after first coat should be hard and water wetted before successive coat which is to be applied after 6-8 hrs. depending on weathering conditions.
Directions for Use:
Surface Preparation : The surface should be thoroughly cleaned and all the oily, previously painted surfaces should be removed with wire brush and wet the wall at least 1-2 times with clean water, and concrete walls should be wetted half an hour before application. If there is any cracks in the application surface then it should be treated with a cement sand slurry having sonacrete 5% by weight of cement.
Application :One volume of Cement Paint to one volume of water. To prepare the mixture, take one part of Cement Paint and add one third of water in it. Stir it in slow pace to make fine thick paste and balance of water is added to make it in applicable consistency. The mixture applied after first coat should be hard and water wetted before successive coat which is to be applied after 6-8 hrs. depending on weathering conditions.
- Cost
- Economy
- Finish
- Matt
- Availability
- 25kgs,5kgs,1kgs

Safire Exterior Wall Putty
The elegant décor of your home can easily be marred by the eyesore of flaking, ruining even the expensive coat of paint on your walls. Saffire Exterior Wall Putty offers you total protection against flaking.Saffire Exterior Wall Putty applied in thicker coats and covers up the undulations on the plastered surface. It fills up the minor cracks/crevices in the plastered wall and provides an even levelled surface.Saffire Exterior Wall Putty is suitable for both internal as well as external walls. If applied on external walls, it fills minor cracks/crevices in the wall surface and helps reduce seepage.
.
.
- Cost
- Economy
- Availability
- 40kgs,20kgs,5kgs,1kgs