Better Performance, Save Money in the Long Run, Clean Shades & Improved Whiteness, Better Anti-algal Performance, 100% washable, A E-1 exterior emulsion is a water-based exterior wall finish with silicon additives and improved anti algal properties suitable for dry to moderately humid climatic conditions.
Coverage
(Depending upon Surface and shades)
*The actual coverage achieved may differ from the quoted coverage due to variables like the application method, application conditions, and the roughness and porosity of the surface.
Clean the surface thoroughly to make it free from dust grease and dirt, Sand the surface with emery paper and wipe clean. Apply a coat of Dreamwalls Primer (Water Thinnable) through brush/Roller/Spray on surfaces and allow to dry for 6 to 8 hours, After drying time sand with emery paper and wipe clean.
Apply DREAMWALLS putty on walls for uneven surfaces and filling cracks, after 4 to 6 hours sand with emery paper and wipe clean.
Apply coat DREAMWALLS primer through Brush/ Roller/ Spray on surfaces after 4 to 6 hours sand with emery paper ad wipe clean.
Mix 100 – 200 ml of clean water with 1 liter of AE 1 exterior emulsion with continuous stirring. Apply 1st coat AE 1 exterior emulsion through brush/Roller/Spray on walls with an interval of 4 hours between successive coat. Apply 2nd coat AE 1 exterior emulsion through Brush/ Roller/ Spray on walls.
Excellent durability and colour retention, Better Performance
Save Money in the Long Run, Clean Shades & Improved Whiteness, Better Anti-algal Performance, 100% washable, Fantastic range of shades, 3 years performance warranty.
Keep the container tightly closed and keep out of reach of children and away from combustible material, food, drink, and animal feeding stuffs. Wear suitable gloves. Avoid contact with skin or eyes, After contact with skin wash immediately with soap and water or a proprietary skin cleanser. Do not use solvent thinners or white spirits. May cause sensitization by skin contact. Use only in well-ventilated areas and store in cool and dry places. Lead content does not exceed more than 90 ppm.
To maintain the paint’s optimal performance, it is essential to follow these guidelines:
Regularly clean and wash off any algae or fungal growth that may appear every six months.Avoid applying the paint when the ambient temperature is below 10°C or if it is expected to drop to this level within few hours of application. Refrain from excessive thinning or overextending the brush during application. Use machine colorant for tinting, ensuring proper stirring and straining before use.
Dreamwalls Exterior emulsion delivers a smooth wall finish, making it an ideal choice for those transitioning from distemper.
Coverage - Mix 100 - 200 ml of clean water
(Depending upon Surface and shades)
*The actual coverage achieved may differ from the quoted coverage due to variables like the application method, application conditions, and the roughness and porosity of the surface.
Clean the surface thoroughly to make it free from dust grease and dirt, Sand the surface with emery paper and wipe clean. Apply a coat of Dreamwalls Primer (Water Thinnable) through brush/Roller/Spray on surfaces and allow to dry for 4 to 6 hours, After drying time sand with emery paper and wipe clean.
Apply DREAMWALLS putty on walls for uneven surfaces and filling cracks, after 4 to 6 hours sand with emery paper and wipe clean.
Apply coat DREAMWALLS primer through Brush/ Roller/ Spray on surfaces after 4 to 6 hours sand with emery paper ad wipe clean.
Mix 100 – 200 ml of clean water with 1 liter of Dreamwalls Exterior Emulsion with continuous stirring. Apply 1st coat Dreamwalls Exterior Emulsion through brush/Roller/Spray on walls with an interval of 4 hours between successive coat. Apply 2nd coat Dreamwalls Exterior Emulsion through Brush/ Roller/ Spray on walls.
Better Performance, Save Money in long run, Colour (Wide Range Shades), Anti peel, Resists fading, Low Voc & Low Odour, Superior firm integrity, Budget Exterior Emulsion.
Keep the container tightly closed and keep out of reach of children and away from combustible material, food, drink, and animal feeding stuffs. Wear suitable gloves. Avoid contact with skin or eyes, After contact with skin wash immediately with soap and water or a proprietary skin cleanser. Do not use solvent thinners or white spirits. May cause sensitization by skin contact. Use only in well-ventilated areas and store in cool and dry places. Lead content does not exceed more than 90 ppm.
To maintain the paint’s optimal performance, it is essential to follow these guidelines:
Regularly clean and wash off any algae or fungal growth that may appear every six months.Avoid applying the paint when the ambient temperature is below 10°C or if it is expected to drop to this level within few hours of application. Refrain from excessive thinning or overextending the brush during application. Use machine colorant for tinting, ensuring proper stirring and straining before use.
Top Coat Exterior Emulsion provides enhanced longevity in comparison to cement paint, rendering it a more economically advantageous option in the long term. Moreover, it obviates the necessity for curing, leading to savings in both time and expenses during the application process. This water-based acrylic emulsion is well-suited for application in regions with dry to moderately humid climates. Top Coat Exterior Emulsion offers a sleek wall finish, making it an excellent selection for individuals transitioning from distemper.
Coverage
(Depending upon Surface and shades)
*The actual coverage achieved may differ from the quoted coverage due to variables like the application method, application conditions, and the roughness and porosity of the surface.
Clean the surface thoroughly to make it free from dust grease and dirt, Sand the surface with emery paper and wipe clean. Apply a coat of Dreamwalls Primer (Water Thinnable) through brush/Roller/Spray on surfaces and allow to dry for 4 to 6 hours, After drying time sand with emery paper and wipe clean.
Apply DREAMWALLS putty on walls for uneven surfaces and filling cracks, after 4 to 6 hours sand with emery paper and wipe clean.
Apply coat DREAMWALLS primer through Brush/ Roller/ Spray on surfaces after 4 to 6 hours sand with emery paper ad wipe clean.
Mix 100 – 400 ml of clean water with 1 liter of Top Coat Exterior Emulsion with continuous stirring. Apply 1st coat Top Coat Exterior Emulsion through brush/Roller/Spray on walls with an interval of 4 hours between successive coat. Apply 2nd coat Top Coat Exterior Emulsion through Brush/ Roller/ Spray on walls.
Better Performance, Save Money in long run, Colour (Wide Range Shades), Anti peel, Resists fading, Low Voc & Low Odour, Superior firm integrity, Budget Exterior Emulsion.
Keep the container tightly closed and keep out of reach of children and away from combustible material, food, drink, and animal feeding stuffs. Wear suitable gloves. Avoid contact with skin or eyes, After contact with skin wash immediately with soap and water or a proprietary skin cleanser. Do not use solvent thinners or white spirits. May cause sensitization by skin contact. Use only in well-ventilated areas and store in cool and dry places. Lead content does not exceed more than 90 ppm.
To maintain the paint’s optimal performance, it is essential to follow these guidelines:
Regularly clean and wash off any algae or fungal growth that may appear every six months.Avoid applying the paint when the ambient temperature is below 10°C or if it is expected to drop to this level within few hours of application. Refrain from excessive thinning or overextending the brush during application. Use machine colorant for tinting, ensuring proper stirring and straining before use.